Montage en opladen Hoe PureClean S5 gebruiken Onderhoud na gebruik
Reserve rollers en filters nodig? Koop dan nu de PureClean S5 navulkit! Hij bevat 2 hoogwaardige rollers en 2 filters
klik op de probleemoplossingsknop voor meer informatie
| Problem | Possible cause | Possible solution |
| Reduced spray or no spray | Clean water tank may be empty | Fill clean water tank as described in „4.1 Filling the clean water tank“ on page 11. |
| Clean water tank not re-installed correctly | Re-install clean water tank correctly as described in „4.1 Filling the clean water tank“ on page 11. | |
| Internal system may be clogged with dirt | Clean nozzle as described in „5.5 Cleaning the nozzle and the brush roller“ on page 18. | |
| Spray tips on nozzle may be clogged with dirt or limescale | Clean nozzle as described in „5.5 Cleaning the nozzle and the brush roller“ on page 18. | |
| If the problem persists, we recommend using distilled water or adding descaler to your cleaning solution. | ||
| Water puddles remain on floor during usage | Inappropriate cleaning mode selected | Select dry mode as described in „4.3 Selecting cleaning modes“ on page 12. |
| Rubber element eroded | Replace the rubber element with a new one. Contact our customer service at www.vileda.com/ support | |
| Brush roller is not turning | Blocking has caused brush roller to stop | Clean blockages as described in „5.5 Cleaning the nozzle and the brush roller“ on page 18. |
| Clean water tank not re-installed properly | Re-install clean water tank properly as described in „4.1 Filling the clean water tank“ on page 11. | |
| Brush roller has not been re-installed properly after cleaning/ replacing | Re-install brush roller properly as described in „5.5 Cleaning the nozzle and the brush roller“ on page 18. | |
| Water spillage on floor during self-cleaning | Dirty water tank was not emptied before running self-cleaning | Empty and clean the dirty water tank as described in „5.2 Emptying and cleaning the dirty water tank“ on page 16. |
| Self-cleaning does not work | Battery is low (below 10 %) | Charge as described in „3 Charging“ on page 10. |
| Brush roller jammed | Clean and re-install brush roller as described in | |
| „5.5 Cleaning the nozzle and the brush roller“ on page 18. | ||
| Vacuum channel in nozzle is clogged by debris | Clean the nozzle as described in „5.5 Cleaning the nozzle and the brush roller“ on page 18. | |
| Device is not working | Battery charging status is insufficient | Let the device charge on its charging base as described in „3 Charging“ on page 10. |
| Nozzle or brush roller is clogged | Remove blockages and/or clean the brush roller as described in „5.5 Cleaning the nozzle and the brush roller“ on page 18. | |
| Dirty water tank is full or has not been re-in- stalled properly after emptying/cleaning | Empty and re-install dirty water tank properly as described in „5.4 Reassembling dirty water tank components“ on page 17. | |
| A click sound indicates correct installation (" | ||
| ||
| Handle not fitted in place | Check handle installation and/or install it again as described in „2 Assembly“ on page 10. | |
| Device is not charging | Battery temperature is too high | Wait for up to one hour. Device should resume charging. |
| Charging base or its adaptor is not plugged in correctly | Make sure that everything is plugged in correctly. | |
| Loss of suction power | Dirty water tank is full and needs to be emptied | Empty dirty water tank as described in „5.2 Emp- tying and cleaning the dirty water tank“ on page 16. |
| Vacuum channel in nozzle is clogged by debris | Clean the nozzle as described in „5.5 Cleaning the nozzle and the brush roller“ on page 18. | |
| Filter clogged by debris | Clean the filter as described in „5.3 Cleaning the tank cover and the filter“ on page 16. | |
| If the filter is still clogged after cleaning or if it is damaged, replace the filter, see „9 Accessories and spare parts“ on page 22. | ||
| Unusual noise while motor is running | Vacuum channel in nozzle is clogged by debris | Clean the nozzle as described in „5.5 Cleaning the nozzle and the brush roller“ on page 18. |
| Reduced spray or no spray | Clean water tank may be empty | Fill clean water tank as described in „4.1 Filling the clean water tank“ on page 11. |
| Clean water tank not re-installed correctly | Re-install clean water tank correctly as described in „4.1 Filling the clean water tank“ on page 11. | |
| Internal system may be clogged with dirt | Clean nozzle as described in „5.5 Cleaning the nozzle and the brush roller“ on page 18. | |
| Spray tips on nozzle may be clogged with dirt or limescale | Clean nozzle as described in „5.5 Cleaning the nozzle and the brush roller“ on page 18. | |
| If the problem persists, we recommend using distilled water or adding descaler to your cleaning solution. | ||
| Water puddles remain on floor during usage | Inappropriate cleaning mode selected | Select dry mode as described in „4.3 Selecting cleaning modes“ on page 12. |
| Rubber element eroded | Replace the rubber element with a new one. Contact our customer service at www.vileda.com/ support | |
| Brush roller is not turning | Blocking has caused brush roller to stop | Clean blockages as described in „5.5 Cleaning the nozzle and the brush roller“ on page 18. |
| Clean water tank not re-installed properly | Re-install clean water tank properly as described in „4.1 Filling the clean water tank“ on page 11. | |
| Brush roller has not been re-installed properly after cleaning/ replacing | Re-install brush roller properly as described in „5.5 Cleaning the nozzle and the brush roller“ on page 18. | |
| Water spillage on floor during self-cleaning | Dirty water tank was not emptied before running self-cleaning | Empty and clean the dirty water tank as described in „5.2 Emptying and cleaning the dirty water tank“ on page 16. |
| Self-cleaning does not work | Battery is low (below 10 %) | Charge as described in „3 Charging“ on page 10. |
| Brush roller jammed | Clean and re-install brush roller as described in | |
| „5.5 Cleaning the nozzle and the brush roller“ on page 18. | ||
| Vacuum channel in nozzle is clogged by debris | Clean the nozzle as described in „5.5 Cleaning the nozzle and the brush roller“ on page 18. | |
| Water is leaking | Foaming detergent was used | Use non-foaming detergent instead. |
| Dirty water tank is full and needs to be emptied | Empty dirty water tank as described in „5.2 Emp- tying and cleaning the dirty water tank“ on page 16. | |
| Dirty water tank not re-installed properly | Re-install dirty water tank as described in „5.4 Reassembling dirty water tank components“ on page 17. | |
| Clean water tank not re-installed properly | Re-install clean water tank as described in „4.1 Filling the clean water tank“ on page 11. | |
| Voice prompts are not emitted | Voice prompts are turned off | Turn on voice prompts as described in „4.4 Activating/deactivating and understanding voice prompts“ on page 13. |
| Voice prompts "Battery abnor- mal" | Error detected within the battery | Contact us via www.vileda.com/support |
| " | There should be a rec- ommendation emitted by the voice prompts | Voice prompt recommends an action: Proceed as recommended by the voice prompt see „4.4 Activating/deactivating and understanding voice prompts“ on page 13. |
| No voice prompts: Turn on voice prompts as described in „4.4 Activating/deactivating and understanding voice prompts“ on page 13. |
1) Kan ik een detergent gebruiken?
Ja, u kunt enkele druppels van een niet-schuimende detergent toevoegen. U kunt dit vooraf controleren door de fles te schudden en te kijken of er schuim en bellen ontstaan.
2) Kan ik reinigingsmiddelen met olie of wassen gemengd met schoon water gebruiken?
Reinigingsmiddelen met oliën of wassen worden niet aanbevolen, omdat ze het product kunnen verstoppen.
3) Kan ik de rolborstel in de wasmachine doen?
Een grondige reiniging van de rolborstel wordt aanbevolen met de hand te doen. De plastic onderdelen van de rolborstel kunnen schade aan de wasmachine veroorzaken.
4) Kan ik een wasverzachter gebruiken voor de rolborstel?
Het gebruik van wasverzachter op microvezel is niet optimaal, omdat dit de reinigingsprestaties op lange termijn vermindert. Wij raden aan het te reinigen met heet water en een normaal wasmiddel, en aan de lucht te laten drogen.
5) Hoe kan ik de spraakassistent uitschakelen?
De spraakassistentknop bevindt zich aan de achterkant van het apparaat. Door eenmaal op de knop te drukken, kunt u de assistent activeren of deactiveren zoals gewenst.
6) Hoe vaak moet ik de rolborstel en filters vervangen?
Dit hangt af van de intensiteit waarmee u het product gebruikt en het wasmiddel dat u gebruikt. Met een gebruik van 1-2 keer per week, met water of een detergent, raden wij aan om de rolborstel en het filter elke 6 maanden te vervangen.
